Network Working Group                                        M. Gahrns
Request for Comments: 2193                                   Microsoft
Category: Standards Track                               September 1997


                        IMAP4 Mailbox Referrals

Status of this Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

1. Abstract

   When dealing with large amounts of users, messages and geographically
   dispersed IMAP4 [RFC-2060] servers, it is often desirable to
   distribute messages amongst different servers within an organization.
   For example an administrator may choose to store user's personal
   mailboxes on a local IMAP4 server, while storing shared mailboxes
   remotely on another server.  This type of configuration is common
   when it is uneconomical to store all data centrally due to limited
   bandwidth or disk resources.

   Mailbox referrals allow clients to seamlessly access mailboxes that
   are distributed across several IMAP4 servers.

   A referral mechanism can provide efficiencies over the alternative
   "proxy method", in which the local IMAP4 server contacts the remote
   server on behalf of the client, and then transfers the data from the
   remote server to itself, and then on to the client.  The referral
   mechanism's direct client connection to the remote server is often a
   more efficient use of bandwidth, and does not require the local
   server to impersonate the client when authenticating to the remote
   server.

2. Conventions used in this document

   In examples, "C:" and "S:" indicate lines sent by the client and
   server respectively.

   A home server, is an IMAP4 server that contains the user's inbox.

   A remote mailbox is a mailbox that is not hosted on the user's home
   server.




Gahrns                      Standards Track                     [Page 1]

RFC 2193                IMAP4 Mailbox Referrals           September 1997


   A remote server is a server that contains remote mailboxes.

   A shared mailbox, is a mailbox that multiple users have access to.

   An IMAP mailbox referral is when the server directs the client to
   another IMAP mailbox.

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC-2119].

3. Introduction and Overview

   IMAP4 servers that support this extension MUST list the keyword
   MAILBOX-REFERRALS in their CAPABILITY response.  No client action is
   needed to invoke the MAILBOX-REFERRALS capability in a server.

   A MAILBOX-REFERRALS capable IMAP4 server MUST NOT return referrals
   that result in a referrals loop.

   A referral response consists of a tagged NO response and a REFERRAL
   response code.  The REFERRAL response code MUST contain as an
   argument a one or more valid URLs separated by a space as defined in
   [RFC-1738]. If a server replies with multiple URLs for a particular
   object, they MUST all be of the same type. In this case, the URL MUST
   be an IMAP URL as defined in [RFC-2192].  A client that supports the
   REFERRALS extension MUST be prepared for a URL of any type, but it
   need only be able to process IMAP URLs.

   A server MAY respond with multiple IMAP mailbox referrals if there is
   more than one replica of the mailbox.  This allows the implementation
   of a load balancing or failover scheme. How a server keeps multiple
   replicas of a mailbox in sync is not addressed by this document.

   If the server has a preferred order in which the client should
   attempt to access the URLs, the preferred URL SHOULD be listed in the
   first, with the remaining URLs presented in descending order of
   preference.  If multiple referrals are given for a mailbox, a server
   should be aware that there are synchronization issues for a client if
   the UIDVALIDITY of the referred mailboxes are different.

   An IMAP mailbox referral may be given in response to an IMAP command
   that specifies a mailbox as an argument.








Gahrns                      Standards Track                     [Page 2]

RFC 2193                IMAP4 Mailbox Referrals           September 1997


   Example:

      A001 NO [REFERRAL IMAP://user;AUTH=*@SERVER2/REMOTE]Remote Mailbox

   NOTE: user;AUTH=* is specified as required by [RFC-2192] to avoid a
   client falling back to anonymous login.

   Remote mailboxes and their inferiors, that are accessible only via
   referrals SHOULD NOT appear in LIST and LSUB responses issued against
   the user's home server.  They MUST appear in RLIST and RLSUB
   responses issued against the user's home server. Hierarchy referrals,
   in which a client would be required to connect to the remote server
   to issue a LIST to discover the inferiors of a mailbox are not
   addressed in this document.

   For example, if shared mailboxes were only accessible via referrals
   on a remote server, a RLIST "" "#SHARED/%" command would return the
   same response if issued against the user's home server or the remote
   server.

   Note: Mailboxes that are available on the user's home server do not
   need to be available on the remote server.  In addition, there may be
   additional mailboxes available on the remote server, but they will
   not accessible to the client via referrals unless they appear in the
   LIST response to the RLIST command against the user's home server.

   A MAILBOX-REFERRALS capable client will issue the RLIST and RLSUB
   commands in lieu of LIST and LSUB.  The RLIST and RLSUB commands
   behave identically to their LIST and LSUB counterparts, except remote
   mailboxes are returned in addition to local mailboxes in the LIST and
   LSUB responses.  This avoids displaying to a non MAILBOX-REFERRALS
   enabled client inaccessible remote mailboxes.

4.1. SELECT, EXAMINE, DELETE, SUBSCRIBE, UNSUBSCRIBE, STATUS and APPEND
     Referrals

   An IMAP4 server MAY respond to the SELECT, EXAMINE, DELETE,
   SUBSCRIBE, UNSUBSCRIBE, STATUS or APPEND command with one or more
   IMAP mailbox referrals to indicate to the client that the mailbox is
   hosted on a remote server.

   When a client processes an IMAP mailbox referral, it will open a new
   connection or use an existing connection to the remote server so that
   it is able to issue the commands necessary to process the remote
   mailbox.






Gahrns                      Standards Track                     [Page 3]

RFC 2193                IMAP4 Mailbox Referrals           September 1997


   Example:  <IMAP4 connection to home server>

      C: A001 DELETE "SHARED/FOO"
      S: A001 NO [REFERRAL IMAP://user;AUTH=*@SERVER2/SHARED/FOO]
             Remote mailbox. Try SERVER2.

      <Client established a second connection to SERVER2 and
      issues the DELETE command on the referred mailbox>

      S: * OK IMAP4rev1 server ready
      C: B001 AUTHENTICATE KERBEROS_V4
      <authentication exchange>
      S: B001 OK user is authenticated

      C: B002 DELETE "SHARED/FOO"
      S: B002 OK DELETE completed

   Example:  <IMAP4 connection to home server>

      C: A001 SELECT REMOTE
      S: A001 NO [REFERRAL IMAP://user;AUTH=*@SERVER2/REMOTE
          IMAP://user;AUTH=*@SERVER3/REMOTE] Remote mailbox.
          Try SERVER2 or SERVER3.

      <Client opens second connection to remote server, and
       issues the commands needed to process the items in the
       remote mailbox>

      S: * OK IMAP4rev1 server ready
      C: B001 AUTHENTICATE KERBEROS_V4
      <authentication exchange>
      S: B001 OK user is authenticated

      C: B002 SELECT REMOTE
      S: * 12 EXISTS
      S: * 1 RECENT
      S: * OK [UNSEEN 10] Message 10 is first unseen
      S: * OK [UIDVALIDITY 123456789]
      S: * FLAGS (Answered Flagged Deleted Seen Draft)
      S: * OK [PERMANENTFLAGS (Answered Deleted Seen ]
      S: B002 OK [READ-WRITE] Selected completed

      C: B003 FETCH 10:12 RFC822
      S: * 10 FETCH . . .
      S: * 11 FETCH . . .
      S: * 12 FETCH . . .
      S: B003 OK FETCH Completed




Gahrns                      Standards Track                     [Page 4]

RFC 2193                IMAP4 Mailbox Referrals           September 1997


      <Client is finished processing the REMOTE mailbox and
       wants to process a mailbox on its home server>

      C: B004 LOGOUT
      S: * BYE IMAP4rev1 server logging out
      S: B004 OK LOGOUT Completed

      <Client continues with first connection>

      C: A002 SELECT INBOX
      S: * 16 EXISTS
      S: * 2 RECENT
      S: * OK [UNSEEN 10] Message 10 is first unseen
      S: * OK [UIDVALIDITY 123456789]
      S: * FLAGS (Answered Flagged Deleted Seen Draft)
      S: * OK [PERMANENTFLAGS (Answered Deleted Seen ]
      S: A002 OK [READ-WRITE] Selected completed

4.2. CREATE Referrals

   An IMAP4 server MAY respond to the CREATE command with one or more
   IMAP mailbox referrals, if it wishes to direct the client to issue
   the CREATE against another server.  The server can employ any means,
   such as examining the hierarchy of the specified mailbox name, in
   determining which server the mailbox should be created on.

   Example:

      C: A001 CREATE "SHARED/FOO"
      S: A001 NO [REFERRAL IMAP://user;AUTH=*@SERVER2/SHARED/FOO]
         Mailbox should be created on remote server

   Alternatively, because a home server is required to maintain a
   listing of referred remote mailboxes, a server MAY allow the creation
   of a mailbox that will ultimately reside on a remote server against
   the home server, and provide referrals on subsequent commands that
   manipulate the mailbox.

   Example:

      C: A001 CREATE "SHARED/FOO"
      S: A001 OK CREATE succeeded

      C: A002 SELECT "SHARED/FOO"
      S: A002 NO [REFERRAL IMAP://user;AUTH=*@SERVER2/SHARED/FOO]
         Remote mailbox.  Try SERVER2





Gahrns                      Standards Track                     [Page 5]

RFC 2193                IMAP4 Mailbox Referrals           September 1997


4.3. RENAME Referrals

   An IMAP4 server MAY respond to the RENAME command with one or more
   pairs of IMAP mailbox referrals.  In each pair of IMAP mailbox
   referrals, the first one is an URL to the existing mailbox name and
   the second is an URL to the requested new mailbox name.

   If within an IMAP mailbox referral pair, the existing and new mailbox
   URLs are on different servers, the remote servers are unable to
   perform the RENAME operation.   To achieve the same behavior of
   server RENAME, the client MAY issue the constituent CREATE, FETCH,
   APPEND, and DELETE commands against both servers.

   If within an IMAP mailbox referral pair, the existing and new mailbox
   URLs are on the same server it is an indication that the currently
   connected server is unable to perform the operation.  The client can
   simply re-issue the RENAME command on the remote server.

   Example:

      C: A001 RENAME FOO BAR
      S: A001 NO [REFERRAL IMAP://user;AUTH=*@SERVER1/FOO
              IMAP://user;AUTH=*@SERVER2/BAR] Unable to rename mailbox
              across servers

   Since the existing and new mailbox names are on different servers,
   the client would be required to make a connection to both servers and
   issue the constituent commands require to achieve the RENAME.

   Example:

      C: A001 RENAME FOO BAR
      S: A001 NO [REFERRAL IMAP://user;AUTH=*@SERVER2/FOO
              IMAP://user;AUTH=*@SERVER2/BAR] Unable to rename mailbox
              located on SERVER2

   Since both the existing and new mailbox are on the same remote
   server, the client can simply make a connection to the remote server
   and re-issue the RENAME command.

4.4. COPY Referrals

   An IMAP4 server MAY respond to the COPY command with one or more IMAP
   mailbox referrals.  This indicates that the destination mailbox is on
   a remote server.  To achieve the same behavior of a server COPY, the
   client MAY issue the constituent FETCH and APPEND commands against
   both servers.




Gahrns                      Standards Track                     [Page 6]

RFC 2193                IMAP4 Mailbox Referrals           September 1997


   Example:

      C: A001 COPY 1 "SHARED/STUFF"
      S: A001 NO [REFERRAL IMAP://user;AUTH=*@SERVER2/SHARED/STUFF]
              Unable to copy message(s) to SERVER2.

5.1 RLIST command

   Arguments:  reference name
               mailbox name with possible wildcards

   Responses:  untagged responses: LIST

   Result:     OK - RLIST Completed
               NO - RLIST Failure
               BAD - command unknown or arguments invalid

   The RLIST command behaves identically to its LIST counterpart, except
   remote mailboxes are returned in addition to local mailboxes in the
   LIST responses.

5.2 RLSUB Command

   Arguments:  reference name
               mailbox name with possible wildcards

   Responses:  untagged responses: LSUB

   Result:     OK - RLSUB Completed
               NO - RLSUB Failure
               BAD - command unknown or arguments invalid

   The RLSUB command behaves identically to its LSUB counterpart, except
   remote mailboxes are returned in addition to local mailboxes in the
   LSUB responses.

6. Formal Syntax

   The following syntax specification uses the augmented Backus-Naur
   Form (BNF) as described in [ABNF].

   list_mailbox = <list_mailbox> as defined in [RFC-2060]

   mailbox = <mailbox> as defined in [RFC-2060]

   mailbox_referral = <tag> SPACE "NO" SPACE
      <referral_response_code> (text / text_mime2)
      ; See [RFC-2060] for <tag>, text and text_mime2 definition



Gahrns                      Standards Track                     [Page 7]

RFC 2193                IMAP4 Mailbox Referrals           September 1997


   referral_response_code = "[" "REFERRAL" 1*(SPACE <url>) "]"
      ; See [RFC-1738] for <url> definition

   rlist = "RLIST" SPACE mailbox SPACE list_mailbox

   rlsub = "RLSUB" SPACE mailbox SPACE list_mailbox

6. Security Considerations

   The IMAP4 referral mechanism makes use of IMAP URLs, and as such,
   have the same security considerations as general internet URLs [RFC-
   1738], and in particular IMAP URLs [RFC-2192].

   With the MAILBOX-REFERRALS capability, it is potentially easier to
   write a rogue server that injects a bogus referral response that
   directs a user to an incorrect mailbox.  Although referrals reduce
   the effort to write such a server, the referral response makes
   detection of the intrusion easier.

7. References

   [RFC-2060], Crispin, M., "Internet Message Access Protocol - Version
   4rev1", RFC 2060, University of Washington, December 1996.

   [RFC-2192], Newman, C., "IMAP URL Scheme", RFC 2192, Innosoft,
   September 1997.

   [RFC-1738], Berners-Lee, T., Masinter, L., and M. McCahill, "Uniform
   Resource Locators (URL)", RFC 1738, CERN, Xerox Corporation,
   University of Minnesota, December 1994.

   [RFC-2119], Bradner, S., "Key words for use in RFCs to Indicate
   Requirement Levels", RFC 2119, Harvard University, March 1997.

   [ABNF], DRUMS working group, Dave Crocker Editor, "Augmented BNF for
   Syntax Specifications: ABNF", Work in Progress, Internet Mail
   Consortium, April 1997.

8.  Acknowledgments

   Many valuable suggestions were received from private discussions and
   the IMAP4 mailing list.  In particular, Raymond Cheng, Mark Crispin,
   Mark Keasling, Chris Newman and Larry Osterman made significant
   contributions to this document.







Gahrns                      Standards Track                     [Page 8]

RFC 2193                IMAP4 Mailbox Referrals           September 1997


9. Author's Address

   Mike Gahrns
   Microsoft
   One Microsoft Way
   Redmond, WA, 98072

   Phone: (206) 936-9833
   EMail: mikega@microsoft.com










































Gahrns                      Standards Track                     [Page 9]